Category Archives: Electricity

How to Make Free Electricity at Home and Save Electricity Bills by Building a DIY Solar Device

Posted on by

The Effective Solution for Today’s Rising Energy Cost

“How do I reduce or cut electricity bills at home?” a question that has been asked many times over by people who are trying to eliminate the rising energy cost. And the only effective solution is to have your own homemade energy or electricity devise. This article will guide you on how to make electricity for your home instead of relying on your local power company.

DIY Homemade Energy Device Using Solar Energy

Solar panels are a great way to make electricity at home. Commercially available solar devises can be expensive to purchase and install, but if you go for the DIY approach you will save literally thousands on the cost of implementing these solar devices and still generate enough electricity to power your household.

Is DIY Solar Panels Easy to Make and What Does it Cost?

Contrary to popular beliefs, DIY solar panel these days are simple enough to make and literally no technical knowledge is required to assemble one. In addition, nowadays, all the tools and materials are readily available and you can make a fully functioning solar devise for just a couple hundred dollars.

In fact, if you have a good guide or manual and ample time in your hands, it may take you less than a week to have a fully functional DIY solar panel ready. Many cheap and easy to understand manuals or guides are available that will show you detailed step by step instructions on how to build this device from start to finish. In fact, if you take the DIY approach and actually build your own DIY solar devise it will only cost you about $50 for the guide and $200 for materials.

This is significantly cheaper than getting commercially sold solar devises, which will cost you thousands of dollars and recurring cost in maintenance. DIY solar panels can also last for years and requires almost no maintenance at all.

Start Generating Free Electricity at Your Home and Cut Your Electricity Bill Today!

Your cost is only in the initial purchase of the guide and materials and from then on, you start saving on your electricity bill and reaping your returns on investment. Instead of paying the local power company, you can get them to issue checks to you in return. DIY solar panels are the perfect solution for environmentally conscious people who are interested in eco-friendly ways to live economically. With the right plans and instructions anyone can learn how to make electricity by building a DIY solar devise system easily and inexpensively.

Saving Electricity on Your Fridge – Top Tips

Posted on by

The fridge is an appliance with one of the biggest consumption of electricity in a typical household. So it pays to explore simple ways in which we can make savings on energy consumption of the fridge.

Here are some of the top tips for saving electricity on your fridge:

1. Let food cool down a little first before putting it into the fridge, as the fridge uses up more electricity in order to bring the temperature of warm or hot foods down.
2. Defrost your fridge and freezer regularly. Frost makes the freezer run more inefficiently and consume more energy than necessary.
3. Place the fridge away from appliances such as an oven or a dishwasher. It should also stand away from direct sunlight.
4. Leave a couple of inches of space around the fridge so that air can circulate around the condenser coils. This helps the heat generated from the fridge to dissipate quicker.
5. Place the fridge along an outside wall, if possible, for the heat generated to be removed more easily.
6. Defrost frozen food in the fridge as this helps cool the fridge as the food thaws.
7. Keep the number of door openings to a minimum, and when the door is open, don’t open it for too long. If a lot of cold air escapes, the fridge has to work harder to chill the air back down.
8. For the same reasons as the tip above, check that the seal between the door and the fridge is airtight and not leaking cold air when the door is shut.
9. Avoid putting the fridge in an environment subject to extreme summer and winter temperatures such as an uninsulated garage. For example, a fridge working in a 90F environment can consume 45 to 50% more energy than one working in a 70F environment.
10. Measure your fridge electricity consumption with an electricity monitor. If you have an old fridge, use the monitor to help you decide if you should upgrade to a newer, more energy efficient model.

Regarding the last point, a leading manufacturer has come up with an electricity monitor that not only measures the electricity consumption but also works out the projected annual cost of running an electric appliance such as a fridge. You input the electric rate found on the utility bill and it does the calculation for you. For more accurate results, let the electricity monitor run for a week or so.

Once you have a number for the projected annual costs of your old fridge, you can then shop around for a new fridge. These days a new fridge comes with an energy guide label that tells you the estimated amount of electricity it uses per year and the estimated yearly operating costs. When you compare the operating costs between the old and the new fridges, you will find it easier to decide whether it makes sense to upgrade.

Electric Guitar Lessons For Beginners – Learn The Basic Sound Components of Your Electric Guitar

Posted on by

In a plugged-in electric guitar instrument, sound is created when the strings are strummed or plucked and the vibration from the movement is picked up by a magnetic device called the pick-up. The sound is amplified with the use of an amplifier which is connected to the guitar via a guitar cable. Electric guitars have two or three pick-ups that come with a pick-up switch that can be controlled to determine which pickup is active. The sound can be further manipulated and modified by turning the volume and tone dials (or knobs) of the guitar, the tuning knobs, as well as knobs of the amplifier.

1. Pickups.

Basically, a pickup is made of a long copper wire that is wound or coiled around one or more magnets. When electricity passes through the copper wire, the magnet/s in the middle of the coil detects the movement or vibrations of the metal strings. Electrical impulses travel through the wire inside the pickup due to these vibrations, and when attached to the amplifier, the impulses create the sound heard from the amplifier. Early single coil pickups were quite problematic because they produced an electric buzz or hum, which can be very distracting when the volume is turned up. To solve this problem, the Gibson guitar manufacturer developed a two-wire pickup that cancels itself out and thus reduces the magnetic feedback. This development was called the “hum bucker.” Today, modern single coil pickups produce less noise than their early counterparts.

2. Knobs and Dials

Most electric guitars have three knobs or dials for controlling the volume, treble and bass tones which are produced by the built-in electronics of the guitar.

3. Tremolo bar

Also called the whammy bar, the tremolo bar allows the player to quickly and easily alter the pitch of the strings, lowering or making the sound higher as the strings are being played. It is usually placed just below the saddle of the guitar, hanging below the strumming hand. Not all guitars have tremolo bars, thus it is not absolutely essential for all kinds of guitar players.

4. Tuners

The tuners are found at the headstock of the guitar and are used to tighten and loosen the strings, thereby tuning them to a specific note. Some guitars that have tremolo bars have the tuners at the tail of the guitar rather than the head, to lock the strings in place at the Nut and keep the strings in tune. The standard tuning for electric guitar is EBGDAE but other types of tuning such as Drop-D are used depending on the preference of the guitarist and the kind of music played.

An understanding of the basic sound components of your electric guitar will always stand you in good stead.